---
title: "How to customize replacement mailbox names and domains"
description: "Customize the domains, sender names and photos, and forwarding domain Auto-Replace uses for replacement mailboxes, in Replacement Defaults."
url: https://helpcenter.smartlead.ai/en/articles/500-how-to-customize-replacement-mailbox-names-and-domains
collection: "SmartSenders"
updated: 2026-11-20
language: en
---

# How to customize replacement mailbox names and domains

Customize the domains, sender names and photos, and forwarding domain Auto-Replace uses for replacement mailboxes, in Replacement Defaults.

When a mailbox burns or its domain nears expiry, Auto-Replace orders a new domain with matching mailboxes. **Replacement Defaults** sets the domain names, sender names and photos, and the forwarding domain used for those orders.

## Before you start

-   You need the **Auto-Replace** tab under Sender Accounts, which requires SmartSenders access.
    
-   Replacement Defaults can't be saved until you add at least one sender persona and your contact information.
    

## Step 1: Open Replacement Defaults

1.  Go to **Sender Accounts** and click the **Auto-Replace** tab.
    
2.  Click **Replacement Defaults** to open it.
    

The **Forwarding Domain** field sits at the top. Below it are the **Domain Naming** and **Sender Persona** cards.

![Smartlead.ai Auto-Replace settings show forwarding domain choices and mailbox-per-domain options, with old forwarding domains and a fixed count of 3 selected. Visible: Auto-Replace, Apply Replacement to, Smart Senders Settings, Also enable for Non Smart Senders, Forwarding Domain, Use forwarding dom](https://staticfiles.gleap.io/ghelparticle/w1bAeskOGO525Eok6ldWqaLTWEE6acKFTh0uWM3WR1fz62TF1KXoL74CuXiMmFZTAfdOlGPzZHv.png)

## Step 2: Choose how replacement domains are picked

1.  In the **Domain Naming** card, click **Configure**.
    
2.  Select **Similar to current** to have Smartlead generate names like the burning domain. Or select **Use a provided list** to pick from a pool you add.
    

![The Domain Naming settings dialog shows replacement-domain rotation options, with “Similar to current” selected and “Use a provided list” unselected. Visible: Domain Naming, Choose how replacement domains are selected during rotation., Similar to current, We auto-generate replacement domains that re](https://staticfiles.gleap.io/ghelparticle/EjSPoa3Q1Kt1jncvl8NVT5OVoADz2H9G2UGlrhCvlO3Ep8fD9SFPHacXUS5sy6akIUdqXFCl3PU.png)

3.  For a provided list, type a name in the search field and press Enter. A name with no dot gets `.com`, so `getacme` becomes `getacme.com`.
    
4.  Hover over a domain chip to see its status. It shows **Available to register**, **Already registered / unavailable** or **Couldn't verify availability right now**.
    

![The Domain Naming settings dialog shows “Use a provided list” selected, a seven-domain warning, domain entries, and the checked nearest-available fallback option. Visible: Domain Naming, Similar to current, Use a provided list, Domain List, Only 7 domains added— add 3 more to avoid rotation failures](https://staticfiles.gleap.io/ghelparticle/O1WYYkVp0KPl9trXLis9ru40POWDk6zONDe4htuhbO6CswSn098OO69QnQ7nFIvZsgL1QZOyKt0.png)

5.  Add domains until the list reaches 10. The notice above the list shows how many are still needed.
    
6.  Keep **Find nearest available if my list runs out** checked to let Smartlead use close alternatives when your list runs out. Uncheck it to pause rotation and be notified instead.
    
7.  Click **Save Settings**.
    

## Step 3: Set sender names and photos

1.  In the **Sender Persona** card, click **Configure**.
    

![Sender Personas settings modal shows one existing persona and fields to add another, with Cancel and Save Settings buttons. Visible: Sender Personas, Manage the sender identities used on replacement mailboxes., Add at least one sender persona — Auto-Replace needs one to create replacement mailboxes.](https://staticfiles.gleap.io/ghelparticle/GMCcm7Ep6R6BaxzLk3lYJDiR5c6v9lZihxZhtC6UOzlTIbvhTeFqnlNyfEta7Z5qjB4yoFr18nq.png)

2.  Add a photo, type a first name and a last name, then click **Add**.
    
3.  Repeat for each persona. Smartlead recommends 10 to 12.
    
4.  Click **Save Settings**.
    

## Step 4: Set the forwarding domain

The forwarding domain is where people land when they visit one of your sending domains, usually your main website.

1.  Select **Use forwarding domain from old domains** to reuse the forwarding domain of the mailbox being replaced. This is the default, and you don't need to enter a domain.
    
2.  Or select **Use new forwarding domain** and enter a domain you own, such as `acme.io`.
    
3.  Fill in your contact information if it isn't there yet.
    
4.  Click **Save Settings** at the bottom of the section.
    

## Good to know

-   **Auto-Replace orders a whole new domain.** Each order brings new mailboxes, and your card on file is charged for it.
    
-   Domain Naming and Sender Persona apply to both Smart Senders and Non Smart Senders mailboxes. The forwarding domain is set separately for each.
    
-   The email address of an existing mailbox can't be changed. On a ZapMail mailbox, the **SmartSender Profile** tab changes the display name and photo.
    

## If something goes wrong

**"Add at least one domain or enable the fallback."** Cause: **Use a provided list** has no domains and **Find nearest available if my list runs out** is unchecked. Fix: add a domain or check the box.

**"Add at least one sender persona to save."** Cause: no persona is listed. Fix: add one as in Step 3.

**"Add your contact information to save."** Cause: your contact details are missing. Fix: fill them in at the bottom of Replacement Defaults.

**"Enter a valid domain like getacme.com."** Cause: the name has spaces or characters other than letters, numbers, hyphens and dots. Fix: retype it.

**A domain shows Already registered / unavailable.** Cause: the name is taken. Fix: replace it. This warning doesn't block saving.

Still stuck? Contact support from the chat in your Smartlead dashboard.

## Related articles

-   [Auto-Replace: Automatically Detect and Replace Burning or Expiring Mailboxes](https://helpcenter.smartlead.ai/en/articles/454.md)
    
-   [How to Bulk Update Your SmartSender Profile](https://helpcenter.smartlead.ai/en/articles/461.md)
